Cisco Webex DX70 Administrator's Manual page 74

Cisco Webex DX70 and DX80

Introduction
Factory reset the video conferencing device
Factory reset using the web interface
We recommend that you back up the log files and configuration of
the device before you continue with the factory reset.
Sign in to the web interface and navigate to
System Recovery.
1. Select the Factory Reset tab, and read the provided
information carefully.
2. Click Perform a factory reset....
3. Click Yes to confirm your choice, or
changed your mind.
4. Wait while the device reverts to the default factory settings.
When finished, the device restarts automatically. This may
take a few minutes.
When the device has been successfully reset to factory
settings, the Setup assistant starts with the Welcome screen.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Factory reset from the user interface
We recommend that you back up the log files and configuration of
the device before you continue with the factory reset.
Maintenance > 1. Select the device name or address at the top of the user
interface.
2. Select Settings.
3. Select
4. Select
Cancel if you have
changed your mind.
5. Wait while the device reverts to the default factory settings.
When finished, the device restarts automatically. This may
take a few minutes.
When the device has been successfully reset to factory
settings, the Setup assistant starts with the Welcome screen.
Peripherals Maintenance Maintenance
(page 2 of 4)
Factory reset.
Reset to confirm your choice, or Back
74
Device settings
Back up log files,
configurations, and custom
elements
Sign in to the web interface and navigate
to Maintenance > System
1. Select the Backup tab.
2. Click Download logs
instructions to save the log files on
if you have
your computer.
3. Click Download backup
the instructions to save the backup
bundle on your computer.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
Recovery.
and follow the
and follow