Cisco DX70 Quick Reference Manual

Front View and Home Screen

Camera with privacy shutter, turn counter-clockwise to
shut and clockwise to open
 Microphone mute button and loudspeaker volume
controls
 Loudspeaker
 SD card slot and connectors for headset and USB.
This USB socket is of the high-current (2 A) type
allowing it to serve as charging port for suitable
devices.
 Power On/Off

Microphone
Cisco DX70 Quick Reference Guide
Your DX70 may operate in one of three modes: Public
Mode, Simple Mode or Enhanced Mode. Public Mode is
similar to a kiosk mode. Public Mode is not covered by
this guide.
In Enhanced Mode the DX70 acts as an Android tablet,
the phone part of the unit is then an app referred to
as the Call app. Operating modes are set up by your
Administrator.
Simple Mode: Provides access to the following functions:
Place calls
Access your list of Contacts
Display the list of Recent calls
Display any Voice Mail (Messages)
View PC (if applicable)
Display the Settings menu
Enhanced Mode: Requires that you start the Call App
before you can use the system as a phone.
To start the Call App tap Phone ( ) in the left corner of the
black bottom bar. The Phone icon is shown in Enhanced
Mode only.
The usual Android navigation buttons (Back, Home and
Recently Used Apps) are shown when the Call App is
running.
Note The descriptions provided in this document assume
that the system either is in Simple Mode or that the Call
App is running.

Rear View

1. USB ports
2. HDMI sockets
3. LAN connection. Connect your PC LAN
here to let your DX70 and PC share a
common LAN connection
4. LAN connection
5. Power supply socket.
Show Self View
Tap the Call icon, if needed, then tap the More icon (
the upper right corner and select Self-view from the menu.
Forward All Calls
1. Tap the Call icon, if needed, then tap the More icon (
in the upper right corner and select Forward all calls.
2. You will be prompted to specify a target phone number.
3. To cancel Forward all calls, repeat the process.
Turn On Do Not Disturb
Tap the Call icon, if needed, then tap the More icon (
the upper right corner and select Do not disturb. Available
(and visible) only when feature has been activated by your
Administrator.
Mute a Call
Press the Microphone mute button on the right side of the
system. To unmute a call, press again.
Stop Your Video Transmission
Turn the camera shutter counter-clockwise. To resume
video transmission, turn shutter clockwise.
Voicemail
The Message Waiting Icon (MWI) light indicates that you
have a new voice message.
To view your voice messages:
1. Tap Recents.
2. Tap Call voicemail.
Play voice message:
Tap Play.
D1512802 Quick Reference Guide Cisco DX70
English Produced August 2014
...
) in
...
)
...
) in