Networkservices Ntp Server [N] Address; Networkservices Ntp Server [N] Key; Networkservices Ntp Server [N] Keyalgorithn; Networkservices Ntp Server [N] Keyid - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

NetworkServices NTP Server [n] Address

n: 1..3
The address of the NTP server that will be used when NetworkServices NTP Mode is set to
Manual, and when NetworkServices NTP Mode is set to Auto and no address is supplied by
a DHCP server.
Requires user role: ADMIN
Default value: "0.tandberg.pool.ntp.org"
Value space: String (0, 255)
A valid IPv4 address, IPv6 address or DNS name.

NetworkServices NTP Server [n] Key

n: 1..3
To make sure that the NTP information comes from a trusted source, the video conferencing
device must know the ID/key pair that the NTP source uses. Use the NetworkServices NTP
Server [n] Key setting to supply the key. Prefix the key with "HEX:".
Requires user role: ADMIN
Default value: ""
Value space: String (0, 2045)
The key, which is part of the ID/key pair that the NTP source uses.

NetworkServices NTP Server [n] KeyId

n: 1..3
To make sure that the NTP information comes from a trusted source, the video conferencing
device must know the ID/key pair that the NTP source uses. Use the NetworkServices NTP
Server [n] KeyId settings for the ID.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 10)
The ID, which is part of the ID/key pair that the NTP source uses.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Maintenance

NetworkServices NTP Server [n] KeyAlgorithn

n: 1..3
Choose the authentication hash function that the NTP server uses, and that the video
conferencing device must use to authenticate the time messages.
Requires user role: ADMIN
Default value: ""
Value space: None/SHA1/SHA256
None: The NTP server doesn't use a hash function.
SHA1: The NTP server uses the SHA-1 hash function.
SHA256: The NTP server uses the SHA-256 hash function (from the SHA-2 family of
hash functions).

NetworkServices SIP Mode

Define whether the device should be able to place and receive SIP calls or not.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Disable the possibility to place and receive SIP calls.
On: Enable the possibility to place and receive SIP calls.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
115
Administrator Guide
Device settings Device settings Appendices