Activity Report Print Select Setting; Send Settings - Sharp MX-C380 Operation Manual

Activity Report Print Select Setting

This is used to have the Image Sending Activity Report
stored in the machine's memory automatically print at
specified times. "Auto Print at Memory Full" and "Print
Daily at Designated Time" can be configured. (The
settings can be simultaneously enabled.)
Auto Print at Memory Full
The Image Sending Activity Report can be set to
automatically print each time the number of transactions
reaches 201.
Print Daily at Designated Time
It can also be set to automatically print at a specified
time (once a day only).
• If you only enable the [Print Daily at Designated
Time] setting
transactions exceeds 201 before the specified time,
each new transaction will delete the oldest
transaction (the oldest transaction will not be
printed).
• The Image Sending Activity Report can also be
printed manually. See
(page 6-90) in the system settings (administrator).
Body Text Print Select Setting
Image files attached to Internet faxes are normally
printed. This setting can be enabled to also have the
e-mail body text (subject and message) printed.
This setting also applies to printing of the body text of
e-mail messages without file attachments.
A maximum of 5 pages of body text can be printed.
and the number of recorded
"List Print (Administrator)"

Send Settings

Click the [Send Setting] tab and configure settings for
Internet Fax transmission.
I-Fax Reception Report On/Off
Setting
This setting is used to request a reception report when
an Internet fax is sent.
The reception report is returned to the sender address
stored in "Own Name and Destination
I-Fax Reception Report Request
Timeout Setting
The duration of time that the machine will wait for a
reception report from the destination machine can be set
by any number from 1 minute to 240 hours in increments
of 1 minute.
This setting is only effective when
Report On/Off
Number of Resend Times at
Reception Error
The number of resend attempts when an error message
is received from an I-Fax recipient can be set to any
number from 0 to 15.
This setting is only effective when
Report On/Off
Maximum Size of E-mail
Attachments
To prevent the transmission of excessively large image
files by Internet fax, a file size limit can be set from 1 MB
to 10 MB in increments of 1 MB. If the total size of the
image files created by scanning the original exceeds the
limit, the image files are discarded.
If you do not wish to set a limit, select [Unlimited].
• This setting is linked to
Attachments
Settings.
• This setting does not apply to the limit for direct
SMTP transmission.
6-86
SYSTEM SETTINGS
WEB PAGE (ADMINISTRATOR)
Set" (page 6-82).
"I-Fax Reception
Setting" is enabled.
"I-Fax Reception
Setting" is enabled.
"Maximum Size of E-mail
(E-mail)" (page 6-84) in the Scan
Contents