Checking The Image Before Printing - Sharp MX-C380 Operation Manual

CHECKING THE IMAGE BEFORE PRINTING

When "Received Data Image Check Setting" (Web page only) is enabled* in the system settings (administrator), you
can check a received image in the display before printing it out. When this function is enabled, follow the steps below to
print a received image.
* The factory default setting is disabled.
Keys in the display can be selected with the arrow keys and the [OK] key.
1
(1)
AAA AAA
2
BBB BBB
CCC CCC
DDD DDD
EEE EEE
FFF FFF
3
If the screen of step 1 appears when you are configuring settings in the setting screens of any of the modes, the configured
settings will be cancelled if you view the image. After viewing the image, you will return to the base screen of image send
mode, regardless of which mode you were in previously.
System Settings (Administrator): Received Data Image Check Setting (Web page only)
Use this to specify whether or not a received Internet fax can be viewed before it is printed.
When an image is received, a
BACK OK
confirmation prompt will appear. Select
the [Yes] key.
If this message appears while you are configuring settings of
any type and you select the [Yes] key, the settings that you are
configuring will be cancelled. If this message appears in
another mode, you will return to the base screen of image send
mode after checking the image.
Select the received image
(2)
(1) Select the key of the received image that
BACK OK
(2) Select the [Image Check] key.
Check the received image and then
BACK OK
select the [Print] key.
Printing begins.
For information on the image check screen, see
CHECK
5-112
SCANNER/INTERNET FAX
you want to check.
Multiple received images can be checked.
To delete an image that has been selected, select the
[Delete] key. To print an image that has been selected,
select the [Print] key.
SCREEN" (page 5-113).
"IMAGE
Contents