Giving Priority To A Scan Transmission Job - Sharp MX-C380 Operation Manual

GIVING PRIORITY TO A SCAN
TRANSMISSION JOB
When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If
you need to give priority to a job and send it ahead of the other jobs, follow the steps below.
Keys in the display can be selected with the arrow keys and the [OK] key.
1
(1)
AAA AAA
BBB BBB
CCC CCC
DDD DDD
2
EEE EEE
FFF FFF
JOB STATUS
(2)
BACK OK
Press the [JOB STATUS] key.
Select the job to which you wish to give
priority.
(1) Switch to the mode of the job to be given
priority.
Select either of the
and press the [OK] key. The mode changes each time the
[OK] key is pressed.
(2) Select the job to be given priority.
(3) Select [Priority] in the displayed screen.
The selected job moves up to the position immediately
following the job in progress. The job will be executed
when the job in progress is completed.
5-107
SCANNER/INTERNET FAX
keys with the
Contents
keys