Original Sizes; Specifying The Original Size - Sharp MX-C380 Operation Manual

ORIGINAL SIZES

SPECIFYING THE ORIGINAL SIZE

The original size is set in "Default original size setting" in the system settings (administrator), and the setting appears in
the [Original] key. This section explains the procedure for specifying the setting when the original size is different from
size shown in the [Original] key.
Select the [Original] key and perform the following.
Specifying an AB original size
Specifying an inch original size
(1)
(2)
System Settings (Administrator): Default original size setting (Web page only)
Set this if you frequently use a particular original size. The set size will appear in the [Original] key.
When this setting is configured, changing the original size can be omitted.
Select the appropriate original size key.
BACK OK
(1) Select the [AB
(2) Select the appropriate original size key.
BACK OK
2-28
COPIER
Inch] key.
Contents