General Procedure For Using Stamp; Select Stamp - Sharp MX-C380 Operation Manual

GENERAL PROCEDURE FOR USING STAMP

To select stamp settings, follow the steps below.
Keys in the display can be selected with the arrow keys and the [OK] key.
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
When using this function with a portrait original on the document glass, place the original so that the top of the image is to the
right.
1
After placing the original, specify the original size.
☞
ORIGINAL SIZES
Select the special modes.
(1) Select the [Special Modes] key.
2
(2) Select the [Stamp] key.
☞
Special modes menu (2nd screen)
3
• "Date" and "Page Numbering" cannot be selected in multiple positions.
• It is not possible to set "Date", "Text", or "Page Numbering" in a print position in which "Date", "Text", or "Page
Numbering" is already set.
4
(page 2-28)
(page 2-40)
BACK OK
BACK OK
Top of image to
the right

Select Stamp.

For detailed information on each of the stamp items, see the
following sections:
Date: ADDING THE DATE TO COPIES (Date)
(page 2-58)
Stamp: STAMPING COPIES (Stamp)
Page numbering: PRINTING PAGE NUMBERS ON COPIES
(Page Numbering)
Text: PRINTING TEXT ON COPIES (Text)
2-66)
Select the print position.
Select from 6 positions: top left, top centre, top right, bottom
left, bottom centre, bottom right.
By default, the following print position is selected.
Date: 3.Upper Right
Page Numbering: 5.Lawer Centre Text: 1.Upper Left
2-56
COPIER
(page 2-60)
(page 2-62)
(page
Stamp: 1.Upper Left
Contents