Adjusting The Intensity Of A Copy (Intensity) - Sharp MX-C380 Operation Manual

ADJUSTING THE INTENSITY OF A COPY (Intensity)

This is used to adjust the intensity (saturation) of colour images.
Keys in the display can be selected with the arrow keys and the [OK] key.
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
1
After placing the original, specify the original size.
☞
ORIGINAL SIZES
Select the special modes.
(1) Select the [Special Modes] key.
2
(2) Select the [Colour Adjustments] key.
(3) Select the [Intensity] key.
☞
[Colour Adjustments] KEY
(1)
3
(2)
Press the [COLOUR START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [COLOUR START] key. Repeat until all pages have been scanned
4
and then select the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
This function cannot be used in combination with "Colour Tone Enhancement" in the copy exposure settings.
To cancel an intensity setting...
Select the [Cancel] key in the screen of step 3.
Weakening the
intensity
(page 2-28)
(page 2-88)
BACK OK
).
Original Strengthening
the intensity
Adjust the intensity.
(1) Adjust the intensity setting.
To strengthen the intensity, select the [+] key and press
the [OK] key.
To weaken the intensity, select the [-] key and press the
[OK] key.
(2) Select the [Special Modes] key.
You will return to the special modes screen. Press the
[BACK] key to return to the base screen of copy mode.
2-97
COPIER
Contents