Checking The Image Before Printing - Sharp MX-C380 Operation Manual

CHECKING THE IMAGE BEFORE PRINTING

When "Received Data Image Check Setting" (Web page only) is enabled* in the system settings (administrator), you
can check a received image in the display before printing it out. When this function is enabled, follow the steps below to
print a received image.
* The factory default setting is disabled.
Keys in the display can be selected with the arrow keys and the [OK] key.
1
0123456789
BBB BBB
9876543210
0612345678
0123456789
CCC CCC
2
When an image is received, a
BACK OK
confirmation prompt will appear. Select
the [Yes] key.
If this message appears while you are configuring settings of
any type and you select the [Yes] key, the settings that you are
configuring will be cancelled. If this message appears in
another mode, you will return to the base screen of image send
mode after checking the image.
Select the received image
BACK OK
(1) Select the key of the received image that
you want to check.
Multiple received images can be checked.
(2) Select the [Image Check] key.
To delete an image that has been selected, select the
[Delete] key. To print an image that has been selected,
select the [Print] key.
4-63
FACSIMILE
Contents