Making Copies Using The Bypass Tray - Sharp MX-C380 Operation Manual

MAKING COPIES USING THE BYPASS TRAY

In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special
media.
For detailed information on paper that can be loaded in the bypass tray, see
(page 1-40) in "1. BEFORE USING THE MACHINE". For precautions when loading paper in the bypass tray, see
"LOADING PAPER IN THE BYPASS
Keys in the display can be selected with the arrow keys and the [OK] key.
1
2
3
TRAY" (page 1-45) in "1. BEFORE USING THE MACHINE".
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
After placing the original, specify the original size.
☞
When placing the originals on the document glass...
After placing the original, be sure to close the automatic
document feeder. If left open, parts outside of the original will
be copied black, causing excessive use of toner.
Place paper in the bypass tray.
Insert the paper with print side face down.
When loading paper larger than A4 or 8-1/2" x 11", be sure to
pull out the bypass tray extension. Pull the bypass tray
extension all the way out. If the bypass tray extension is not
pulled all the way out, the size of the loaded paper will not be
correctly displayed.
Select the [Paper Select] key.
BACK OK
2-36
"IMPORTANT POINTS ABOUT
ORIGINAL SIZES (page 2-28)
COPIER
PAPER"
Contents