Using The Document Glass To Make Copies - Sharp MX-C380 Operation Manual

USING THE DOCUMENT GLASS TO MAKE COPIES

To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the
automatic document feeder and place the original on the document glass. This section explains how to make a copy
(1-sided copy of a 1-sided original) using the document glass.
Keys in the display can be selected with the arrow keys and the [OK] key.
Portrait original
1
Landscape original
c b a
2
3
When placing an AB (inch) size or non-standard size original, specify the original size as explained in
SIZES" (page 2-28).
Align the top edge of the
original against the side of
the document glass with
the scale.
Align the right side of the
original against the side of
the document glass with
the scale.
BACK OK
BACK OK
2-12
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
Document glass scale
mark
A5
(5-1/2" x 8-1/2")
B5
A4 (8-1/2" x 11")
• The maximum original size that can be placed on the
document glass is A4 (8-1/2" x 11").
• Align the middle of the original with the tip of the
• Place the original in the appropriate position for its size as
shown above.
• After placing the original, be sure to close the automatic
document feeder. If left open, parts outside of the original will
be copied black, causing excessive use of toner.
Select the [Original] key.
Specify the original size.
COPIER
mark.
"ORIGINAL
Contents