Adding Inserts When Copying On Transparency Film (Transparency Inserts); Bypass Tray - Sharp MX-C380 Operation Manual

ADDING INSERTS WHEN COPYING ON
TRANSPARENCY FILM
(Transparency Inserts)
When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts
function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the
sheets easy to handle.
It is also possible to copy on the inserts.
Keys in the display can be selected with the arrow keys and the [OK] key.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
After placing the original, specify the original size.
☞
ORIGINAL SIZES
Select the special modes.
(1) Select the [Special Modes] key.
3
(2) Select the [Transparency Inserts] key.
☞
Special modes menu (3rd screen)
(page 2-28)
(page 2-40)
Inserts
Place the transparency film in the

bypass tray.

• Transparency film can only be placed in the bypass tray.
• Place the transparency film face down on the bypass tray.
When placing transparency film, place so that the rounded
corner of the film is to the front and left.
• After loading the transparency film, configure the bypass tray
settings as explained in
BYPASS TRAY" (page 2-36).
2-71
COPIER
"MAKING COPIES USING THE
Contents