Base Screen Of Fax Mode - Sharp MX-C380 Operation Manual

BASE SCREEN OF FAX MODE

The fax function is used by selecting settings and operations in the base screen of fax mode. To display the base screen
of a mode, press the [IMAGE SEND] key and select the desired mode in [Mode Switch].
Example: switching from scanner mode to fax mode
Each of the other modes that can be displayed by pressing the [IMAGE SEND] key (scan, Internet fax, USB memory,
PC scan and data entry modes) also have base screens.
Transmission destinations can be stored in one-touch keys in the address book and retrieved from the address book
screen when you need to use them. The address book is shared by fax mode, scan mode, Internet fax mode and data
entry mode.
To switch to the Address Book screen from the base screen, select the [Address] key and then the [Address Book] key
and press the [OK] key. To switch to the base screen from the Address Book screen, select the [Basic Menu] key and
press the [OK] key. This chapter refers to the base screen of fax mode as the "base screen".
Base screen of fax mode
The procedures in this chapter begin from the base screen of fax mode.
System Settings (Administrator): Default Display Settings
One of the following screens can be selected for the initial screen that appears when the [IMAGE SEND] key is pressed.
• Base screen of each mode (scan, Internet fax, fax, or data entry mode)
• Address book screen
READY
BACK OK PRINT
DATA
LINE
IMAGE SEND
DATA
COPY
SYSTEM
SETTINGS
JOB STATUS
Modes that cannot be used because the
required options are not installed are greyed
out to prevent selection.
4-7
LOGOUT
Address book screen
AAA AAA
BBB BBB
CCC CCC
DDD DDD
EEE EEE
FFF FFF
GGG GGG
HHH HHH
III III
JJJ JJJ
FACSIMILE
Contents