Creating Pptp, L2Tp, Or L2Tp Over Ipsec Wan Connection - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

Creating PPTP, L2TP, or L2TP over IPsec WAN Connection

On the connection creation page, go to the All Settings tab. Then select the relevant value from
the Connection type drop-down list and specify the needed values.
Figure 89. The page for creating a new PPTP connection. Selecting a connection type.
Parameter
Enable connection
Connection name
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Available for the advanced mode only.
A name for the connection for easier identification.
Page 104 of 235
Configuring via Web-based Interface
Description