D-Link DAP-600P User Manual page 87

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
In the Static IP Addresses section, you can specify MAC address and IPv6 address pairs (set a
fixed IPv6 address in the local area network for a device with a certain MAC address). The access
point assigns IPv6 addresses in accordance with the specified pairs only when the Stateful value is
selected from the Mode of dynamic IPv6 address assignment drop-down list in the
Dynamic IPv6 Addresses section.
Figure 73. Configuring the local interface. The IPv6 tab. The section for creating MAC-IPv6 pairs.
To create a MAC-IPv6 pair, click the ADD button (
address field. You can choose a device connected to the access point's LAN at the moment. To do
this, select the relevant MAC address from the drop-down list (the field will be filled in
automatically). Then in the IP address field, enter an IPv6 address which will be assigned to the
device with the specified MAC address. In the Hostname field, specify a network name of the
device for easier identification (optional). Click the APPLY button.
To create MAC-IPv6 pairs for the devices connected to the access point at the moment, click the
KNOWN CLIENTS button. In the opened window, select the needed device and click the OK
button. To view the latest list of the connected devices, click the REFRESH button.
To edit the settings for the existing MAC-IPv6 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the APPLY button.
To remove a MAC-IPv6 pair, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
the editing window.
). Then click the APPLY button. Also you can remove a pair in
Page 87 of 235
Configuring via Web-based Interface
). In the opened window, fill in the MAC