Auto Provision - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

Auto Provision

On the System / Auto Provision page, you can enable the Auto Provision function.
The Auto Provision function allows your ISP to manage the device's settings remotely: DAP-600P
connects to the ISP's server, compares the current configuration file with the configuration file
stored on this server, and updates its settings if the files are different.
Figure 161. The page for configuring the Auto Provision function.
You can specify the following parameters:
Parameter
Enable Auto Provision
Move the switch to the right to enable the Auto Provision function.
If the Access point or Repeater mode was selected in the Initial
Configuration Wizard and the Static value is selected from the
Mode of local IP address assignment list on the
Connections Setup / LAN page, the Gateway IP address
field should also be filled in.
Move the switch to the left to disable the Auto Provision function.
Page 220 of 235
Configuring via Web-based Interface
Description