Advanced - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

Advanced

In this menu you can configure advanced settings of the access point:
•
add name servers
•
configure autonegotiation or manually configure speed and duplex mode for each Ethernet
port of the access point
• configure the MAC filter
•
create or edit for VLANs
•
enable and configure the SNMP agent of the access point
• configure a DDNS service
•
configure notifications on the reason of the Internet connection failure
• define static routes
•
configure TR-069 client
•
create rules for remote access to the web-based interface
• enable the UPnP IGD protocol
•
enable the built-in UDPXY application for the access point
• allow the access point to use IGMP
•
allow the access point to use RTSP, enable the SIP ALG, the PPPoE/PPTP/L2TP/IPsec pass
through functions for the access point
• configure VPN tunnels based on IPsec protocol.
Page 151 of 235
Configuring via Web-based Interface