DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Log
On the System / Log page, you can set the system log options and configure sending the system
log to a remote host.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Parameter
Type
Level
Figure 153. The System / Log page. The Settings tab.
Select a type of logging from the drop-down list.
•
Local: The system log is stored in the access point's memory.
When this value is selected, the Server and Port fields are
not displayed.
•
Remote: The system log is sent to the remote host specified
in the Server field.
•
Remote and local: The system log is stored in the access
point's memory and sent to the remote host specified in the
Server field.
Select a type of messages and alerts/notifications to be logged.
Page 211 of 235
Configuring via Web-based Interface
Description