DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Creating Dynamic IPv4 or Static IPv4 WAN Connection
On the connection creation page, go to the All Settings tab. Then select the relevant value from
the Connection type drop-down list and specify the needed values.
Figure 72. The page for creating a new Static IPv4 connection. Selecting a connection type.
Parameter
Enable connection
Connection name
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 81 of 175
Configuring via Web-based Interface
Description