Selecting Operation Mode; Router - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

Selecting Operation Mode

Select the needed operation mode and click the NEXT button.

Router

In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Autonomous value. Then from the Work mode list, select the Router
value. In this mode you can configure a WAN connection, set your own settings for the wireless
network in the 2.4GHz and 5GHz bands, and set your own password for access to the web-based
interface of the device.
Figure 36. Selecting an operation mode. The Router mode.
Page 49 of 235
Configuring via Web-based Interface