Mesh Network Subordinate Device (Slave) - D-Link DAP-600P User Manual

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual

Mesh Network Subordinate Device (Slave)

In order to configure DAP-600P as a subordinate device of your Mesh network, from the
Connection method list, select the Super Mesh value. Then from the Device Role list, select
the Slave value. From the Frequency band list, select the band where your main device (in the
Master role) operates.
Then a device in the Slave role is configured in the assess point mode. In this mode you can change
the LAN IP address, set your own settings for the wireless network in the 2.4GHz and 5GHz bands,
and set your own password for access to the web-based interface of the device.
Figure 42. Configuring the Super Mesh function for a subordinate device.
Page 55 of 235
Configuring via Web-based Interface