D-Link DAP-600P User Manual page 94

DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Figure 80. The page for creating a new Static IPv4 connection. The Miscellaneous section.
Parameter
NAT
RIP
Ping
When all needed settings are configured, click the APPLY button.
Miscellaneous
If the switch is moved to the right, the network address translation
function is enabled. Do not disable the function unless your ISP
requires this.
Move the switch to the right to allow using RIP for this connection.
If the switch is moved to the right, the access point responds to ping
requests from the external network through this connection. For
security reasons, it is recommended to disable this function.
Page 94 of 235
Configuring via Web-based Interface
Description