Bluetooth Led - Cisco Headset 730 User Manual

Your Headset
Procedure
Step 1
Slide up and hold the Power/Bluetooth switch for two seconds until the Bluetooth LED blinks.
Step 2 Enable Bluetooth on your device.
Note
Step 3 Select your headset from the device list.
Note

Bluetooth LED

The Bluetooth LED is located on the back of the left ear cup at the top of the Power/Bluetooth switch and
shows your headset connection status.
Table 1: Bluetooth LED Status
Light Status
Solid blue, then
off
Blinks blue
REVIEW DRAFT - CISCO CONFIDENTIAL
You can enable and disable Bluetooth from the Settings menu on most call devices.
Your headset will appear in the device list as Cisco Headset 730 followed by the last three digits
of your headset serial number. See
more information.
System State
Successful Bluetooth connection
Headset in Pairing Mode
Find Your Cisco Headset 730 Serial Number, on page 30
Cisco Headset 730 User Guide
Bluetooth LED
to for
5