Cisco Headset 730 User Manual page 41

Product Safety
•
•
Important Headset Safety Information
When you plug in your headset, lower the volume of the headset speaker before you put the headset on. If
you remember to lower the volume before you take the headset off, the volume will start lower when you
plug in your headset again.
Be aware of your surroundings. When you use your headset, it may block out important external sounds,
particularly in emergencies or in noisy environments. Don't use the headset while driving. Don't leave your
headset or headset cables in an area where people or pets can trip over them. Always supervise children who
are near your headset or headset cables.
Compliance Statements
Compliance Statements for the USA
General RF Exposure Compliance
This device has been evaluated and found compliant to the ICNIRP (International Committee on Non-Ionizing
Radiation Protection) limits for Human Exposure of RF Exposure.
Part 15 Radio Device
Caution The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency.
Any changes or modification to said product not expressly approved by Cisco, including the use of non-Cisco
antennas, could void the user's authority to operate this device.
Important Headset Safety Information, on page 33
Compliance Statements, on page 33
High Sound Pressure—Avoid listening to high volume levels for long periods to prevent
possible hearing damage.
5
C H A P T E R
Cisco Headset 730 User Guide
33