Yamaha YK-X Series User Manual page 116

CHAPTER 4 Adjustment
12) Enter the following values in M1 and M2 for "11. Arm length [mm]" of axis
parameters.
YK500XG
YK600XG
YK600XGH
YK700XG
YK800XG
YK900XG
YK1000XG
13) Enter the following values in "12. Offset pulse" of axis parameters.
M1= X-axis position pulse value you made a note of in step 11)
M2= Y-axis position pulse value you made a note of in step 9) + Y-axis position pulse value you made a note of in step 10)
Round off the decimal part of the M2 value.
14) After entering the parameters, remove the pin, bolt, and sleeve.
Reattach the cover, plate and screw.
M1 (X-axis arm length)
200.00
300.00
200.00
300.00
400.00
500.00
600.00
2
Screw
Fig. 4-13
4-36
M2 (Y-axis arm length)
300.00
300.00
400.00
400.00
400.00
400.00
400.00