About Serial And Usb Communications; Usb Troubleshooting - Honeywell RT10A User Manual

1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge
3. Tap the menu icon
4. For Honeywell branded scanners tap Honeywell or for Intermec branded
5. Scan the Connect Barcode displayed on screen.
6. When the scanner is successfully paired with the computer, the scanner name
Unpair a Paired Scanner
You can unpair the scanner to remove it from the Connected Device list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge
3. Tap the menu icon
4. Tap Honeywell or Intermec.
5. Scan the Disconnect Barcode displayed on screen.

About Serial and USB Communications

You can use these optional RT10A accessories to transmit data to and receive data
from another device through serial or USB communications:
•
•
•
For information about these accessories, contact your local sales representative.

USB Troubleshooting

•
•
RT10A Rugged Tablet
scanners tap Intermec.
appears under Connected Device.
Vehicle dock
Home Base
Ethernet Home Base
If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
driver is part of the Honeywell_Mobility SDK_Android software.zip file. To learn
where to get the software, see
Check to make sure you have enabled the USB for file transfer. To learn more, see
Configure USB Connection and Transfer Files
.
and then tap Pair BT Scanner.
.
and then tap Disconnect BT Scanner.
Developer Information on page 60.
on page 16
59