About Network Communications; Connect To A Wi-Fi Network - Honeywell RT10A User Manual

About Network Communications

You can easily add the mobile computer to your wireless or wired data collection
network. Connect the RT10A your computer using:
•
•
•
•

Connect to a Wi-Fi Network

The computer contains an 802.11 a/b/g/n/ac radio to transfer data using wireless
communications. Before you connect to a Wi-Fi network, you need to know about
your network security protocol and its required credentials.
By default, the 802.11 radio is disabled.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap Off
4. On the list, tap a network name to initiate a connection.
5. Enter any required information if the network is secured (e.g., password, key or
6. Tap Connect.
Once you connect to a saved Wi-Fi network:
•
•
•
•
52
802.11 a/b/g/n/ac radio communications
Ethernet communications
Bluetooth communications
USB and serial communications
> Network & Internet > Wi-Fi.
to toggle Wi-Fi radio On
To add a network if it does not appear on the list:
a. Navigate to the end of the discovered network list, and then tap
Add network.
b. Type the Wi-Fi network name (SSID).
c. Choose a security protocol and add any required information.
d. Tap Save.
certificate name).
Tap the network name on the list to view details (e.g., status, signal strength,
speed, frequency, security type). Select
The computer automatically connects to the same network when the network is
in range and the WLAN radio is turned On.
To remove a network from your saved list, tap and hold the network name and
select Forget network. You can do this for networks you no longer use.
To modify a network from your saved list, tap and hold the network name and
select Modify network. You can do this if you changed your network password.
. A list of discovered networks appears.
to close details screen.
RT10A Rugged Tablet