Delete A Scan Setting Profile; Change The Bluetooth Scanner Settings; About The Optional Digital Scan Button; Enable And Configure The Digital Scan Button - Honeywell RT10A User Manual

Delete a Scan Setting Profile

1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap and hold the profile you want to delete.
4. Tap Delete, and then OK.

Change the Bluetooth Scanner Settings

When the Bluetooth scanner is paired, changes can be made to the Default profile
for the scanner.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap Bluetooth Scanner > Default Profile > Data Processing Settings.
4. Modify the settings to meet your application needs.
To learn more about the scanner settings, see
29.

About the Optional Digital Scan Button

By default, the imager is enabled for scanning with the left, right, and front scan
buttons configured to trigger the imager. If your application environment requires
use of an on-screen scan button, enable the Digital Scan Button feature in the
Settings app. Once enabled, you can then modify the appearance of the on-screen
Scan button and select the apps the button appears in.

Enable and Configure the Digital Scan Button

1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap Enable Digital Scan Button to turn the feature on. A preview of the button
34
> Honeywell Settings > Scanning > Internal Scanner.
> Honeywell Settings > Scanning.
> Honeywell Settings > Digital Scan Button.
appears at the bottom of the screen.
Data Processing Settings
RT10A Rugged Tablet
on page