Rename The Computer; Rename, Share Or Unpair A Paired Device; About The Scanner Edge App - Honeywell RT10A User Manual

Rename the Computer

You can change the name of the computer to make it easier to identify when
pairing with other Bluetooth enabled devices and view statistics about received
files.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap Device Name. Type the new name and then tap Rename.

Rename, Share or Unpair a Paired Device

You can rename a paired device to make it easier to identify it on the list or unpair
the device to remove it from the paired list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Take one of the following actions:

About the Scanner Edge App

Your mobile computer is equipped to communicate with scanners using Bluetooth
technology through the Scanner Edge app. The Bluetooth radio must be turned on.
System bar icons indicate Bluetooth radio status.
To turn on the Bluetooth radio:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. If necessary, tap Off
Connect a Bluetooth Scanner
To connect to a Bluetooth scanner, the Bluetooth radio must be turned on and then
scan a pairing barcode with the Bluetooth scanner.
58
> Connected devices > Connection preferences > Bluetooth.
> Connected devices > Previously connected devices.
next to the paired device.
• To rename the device, type the new name, and then tap OK.
• To allow Internet connection sharing or Contact Sharing, tap the check box
next to the setting.
• To unpair the device, tap Forget.
> Connected devices > Connection preferences > Bluetooth.
to toggle the Bluetooth radio On .
RT10A Rugged Tablet