Screen Blanking; Motion Detection Action; Motion Timeout Settings; Motion Detection Source - Honeywell RT10A User Manual

3. Choose one of the following options:

Screen Blanking

Screen blanking (blackout) can be enabled when the vehicle is in motion. Once
screen blanking is enabled, the display is blanked out (or a preselected zoom area
is displayed) any time when the vehicle is in motion. If the screen blanking cable is
removed, screen blanking is disabled and the display remains On.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings

Motion Detection Action

Determine what to do when motion is detected:
•
•
•
•

Motion Timeout Settings

Screen blanking can be configured to provide delays.
•
•

Motion Detection Source

Select the Motion Detection Source. The computer supports the screen blanking
box to determine motion.
Select the port (COM1 or COM2) the blanking box is attached.
12
• To have the tablet automatically adjust the brightness for your work
environment, turn On the Adaptive brightness setting. You can tap
Adaptive brightness to toggle the feature On or Off.
• To set the brightness level manually, verify the Adaptive brightness feature
is turned Off, and then select Brightness level. Adjust the slider to set the
brightness level.
> Honeywell Settings > Zoom Zone.
Display Always Active - The display does not change when motion is detected.
Display Black - The display is blacked out when motion is detected.
Display Freeze - The display is frozen at the time motion is detected.
Zoom Zone - A pre-configured zoom area is displayed when motion is detected.
Delay on Motion - Configure the delay between motion detection and screen
blanking. The default is 2.5 seconds.
Delay on Stop - Configure the delay between motion stopping and the screen
resuming normal behavior. The default is 2.5 seconds.
RT10A Rugged Tablet