Replace The Battery - Honeywell RT10A User Manual

Replace the Battery

When battery power is low, you have the choice to either charge the battery in the
tablet, or replace it with another fully charged battery. Spare batteries can be
purchased separately.
Caution: Ensure all components are dry prior to placing the battery in the
Hot Swap
You can replace the battery on demand provided the following conditions are met:
•
•
Swap Battery Mode
Swap Battery mode places the tablet in a low power state so that the battery can be
removed for a short time.
1. Save your files and close any open applications.
2. Press and hold the Power button until the options menu appears.
3. Tap Swap Battery. Follow the on-screen instructions to place the unit in battery
4. Unlock the battery.
5. While pushing the battery release button toward the top of the tablet, lift the
6. Insert the charged battery into the tablet.
RT10A Rugged Tablet
1
Caution: We recommend the use of Honeywell accessories and power
adapters. Use of any non-Honeywell accessories or power
adapters may cause damage not covered by the warranty.
Caution: Ensure all components are dry prior to mating the computers
and batteries with peripheral devices. Mating wet components
may cause damage not covered by the warranty.
computer terminal. Mating wet components may cause damage not
covered by the warranty.
The tablet been powered on for at least 4 minutes.
AND
You insert a new battery within 30 seconds.
swap mode.
edge of the battery and remove it from the tablet.
2
5