About Scanning Configuration Barcodes; Use The Scan Demo App - Honeywell RT10A User Manual

3. Center the aiming beam over the barcode. Make sure the entire barcode is
4. Release the button when the computer beeps. The barcode information is
Note: Not all barcode symbologies are enabled by default. If a barcode does not scan, the
correct symbology may not be enabled.

About Scanning Configuration Barcodes

After completing the out-of-box set up process, Provisioning mode is
automatically turned Off. Scanning a barcode to install applications, certificates,
configuration files, and licenses on the computer is restricted unless you turn On
(enable) Provisioning mode in the Settings app.
To learn more

Use the Scan Demo App

Use the Scan Demo app to read barcodes or to test your symbology decode settings.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Demos.
3. Swipe left or right on the screen until Scan Demo appears under the turntable.
4. Point the scanner window at the barcode.
5. Press and hold the Fn2 button or tap and hold the on-screen SCAN button.
36
inside the illumination frame.
entered into the application in use.
About Provisioning Mode
Tap the center of the box image to open the app.
see page 61.
RT10A Rugged Tablet