Honeywell RT10A User Manual page 72

Set Up a Device as a Server
Wi-Fi Staging provides two kinds of configurations for a master device acting as a
server through a hotspot. Setup of the server device will differ based on the staging
configuration your choose:
•
•
The hotspot on the server device will be named HONEYWELL_WIFI_STAGING.
Note: We recommend starting the server before setting any clients because the clients
require more time and power to scan and search for the hotspot signal if the server is
not created in advance.
Note: To control bandwidth usage, the server side of Wi-Fi Staging has a maximum
limitation of 10 concurrent client connections. If more than 10 client devices attempt
to connect to the server device at the same time, staging of some of those clients will
be delayed until client connections become available as the staging process
progresses.
Basic Configuration
Basic configuration includes the most common system settings.
1. Launch the Wi-Fi Staging app on the server device by tapping Settings >
2. Tap Basic Configs to start the configuration wizard.
3. System language: Tap
4. Connection preferences: Enable Bluetooth and/or NFC. They are disabled by
5. Sound preferences: Adjust the default volume for each type of audio by
6. Location setting: Enable the location switch. It is disabled by default. Tap
62
Basic Configs include the most common system settings:
• System language
• Bluetooth and NFC
• System volume
• Location
• Network
• File download
• Application installation or launch
Advanced Configs allow you to stage your devices with .xml files
Honeywell Settings > Wi-Fi Staging.
selected. Tap NEXT.
default. Tap NEXT.
dragging the slider, then tap NEXT.
NEXT.
to add a language. At least one language must be
RT10A Rugged Tablet