Table of Contents
Advertisement
6. When the scanner is successfully paired with the computer, the scanner name
appears under Connected Device.
Unpair a Paired Scanner
You can unpair the scanner to remove it from the Connected Device list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge
3. Tap the menu icon
4. Tap Honeywell or Intermec.
5. Scan the Disconnect Barcode displayed on screen.
About Serial and USB Communications
You can use optional accessories to transmit data to and receive data from another
device through serial or USB communications.
For more information, see the EDA10A Accessories User Guide, available on the
EDA10A product page at
representative.
USB Troubleshooting
•
If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
72
DRAFT - 3/24/23
.
and then tap Disconnect BT Scanner.
sps.honeywell.com
or contact your local sales
EDA10A Enterprise Tablet User Guide
Advertisement
Table of Contents
