Install Software With Autoinstall; Optional Microsd Card Method - Honeywell RT10A User Manual

Install Software with AutoInstall

Important: The RT10A must have power for the entire length of the install process or it could
become unstable. Do not attempt to remove the battery during the process.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the toggle button to turn Provisioning mode On.
4. Save the upgrade file (*.zip or *.apk) in one of the following folders on the RT10A
5. Swipe up from the bottom of the Home screen to access all apps.
6. Tap AutoInstall Settings
7. Tap Packages Update from the AutoInstall Settings screen.
8. Once installation is complete, turn Provisioning mode Off.
Note: Some updates do not require the computer to reboot before installation.

Optional microSD Card Method

The RT10A comes equipped with a microSD card socket. You can install an
upgrade from a microSD card you insert in the computer.
Important: The RT10A must have power for the entire length of the install process or it could
become unstable. Do not attempt to remove the battery during the process.
1. On the RT10A, swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the toggle button to turn Provisioning mode On.
4. Tap AutoInstall Settings
5. Press and hold the Power button, and then tap Power off.
68
> Honeywell Settings > Provisioning mode.
mobile computer:
• Internal shared storage\honeywell\autoinstall
Software upgrades saved to this folder for installation, do not persist when a
Erase all data (factory reset) or Enterprise data reset is performed.
• IPSM card\honeywell\autoinstall
Software upgrades saved to this folder, do not persist when an Erase all data
(factory reset) is performed. However, the upgrade does persist if an
Enterprise data reset is performed.
The computer automatically initiates a reboot and installs the
software upgrade. The system update screen appears during the upgrade pro-
cess. When the update is finished, the lock screen appears.
> Honeywell Settings > Provisioning mode.
and verify AutoInstall is enabled
. Verify AutoInstall is enabled
.
.
RT10A Rugged Tablet