Connect A Bluetooth Device; Rename The Computer And View File History - Honeywell ScanPal EDA71 User Manual

Connect a Bluetooth Device

To connect to a Bluetooth device, you must turn On the Bluetooth radio and then
select the device from a list of discovered devices.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. If necessary, tap Off
4. Tap Pair a new device.
5. Select a device on the list to initiate a pairing request.
6. When the pairing request message appears:
7. (Optional) Once paired to a device, you can connect manually to the device. Tap
•

Rename the Computer and View File History

You can change the name of the computer to make it easier to identify when
pairing with other Bluetooth enabled devices and view statistics about received
files.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap Device Name. Type the new name and then select Rename.
60
> Connected devices > Bluetooth.
Bluetooth devices appears.
A list of available Bluetooth devices in range appears.
• Verify the pairing PIN is the same on both device, and then tap Pair.
OR
• If the pairing request requires a PIN, enter the PIN, and then tap Pair.
When the device is successfully paired with the computer, the device name
appears under Paired devices.
the device under Paired devices. The word "Connected" appears under the
paired device name.
The status icon changes from
To disconnect a paired device, tap the name of the paired device and then tap OK
when the "Disconnect?" screen appears.
> Connected devices > Bluetooth.
to toggle the Bluetooth radio On
to .
. A list of available
EDA71 User Guide