Scanning Barcodes - Honeywell ScanPal EDA70 User Manual

Scanning barcodes

Scan engine will emit scanning beams for accurate barcode aiming. It will also support a
full range of 360° scanning, which will make barcode scanning more convenient.
Note: Before scanning a barcode, you only need to enable the desired barcode symbology
in the settings.
1.
2.
3.
When the scanning is successfully completed, you will hear a "beep" sound, and the Good
Read LED will open immediately.
User Guide for ScanPal Series Terminal
Tap or pull upward
Align the scanning window with the barcode and stably place the terminal a few
inches away from the barcode.
Press one of the scan keys or tap Scan on the interface. Make sure the entire barcode is
within the scanning beam range.
Chapter 3: Scanning Function
>Demos>ScanDemo.
Scan Engine
45