Scan A Barcode - Honeywell RT10W Quick Start Manual

Button

Scan a Barcode

For optimum performance, avoid reflections by scanning the
barcode at a slight angle.
1. Press
2. Touch
3. If the
is white, touch it to
enable the barcode
function. (If the icon is
orange, it is already
enabled.)
4. Point the tablet at the
barcode.
5. Press the Fn2 button.
Center the aiming
beam over the barcode.
6. Release the Fn2 button.
Name
Fn2
Volume/
Brightness
or double-tap
Device ON/OFF.
Barcode icon
Description
Programmable shortcut
button.(The default is the
camera app.)
Raise or lower the volume or
brightness.
to open the Hottab utility.
13