Lateral Grass Ejection Chute; Adjusting The Cut Height; Switching On And Off - Grizzly ARM 4051 A Lion-Set Translation Of The Original Instructions For Use

A level indicator is fitted on the
side of the grass bag.
Flap open:
grass catcher empty
Flap closed:
grass catcher full

Lateral grass ejection chute

As an alternative to the grass collection
basket, you can also use the lawnmower
with side grass discharge..
Vor der Nutzung des seitlichen
Grasauswurfs muss das Mulchkit
( 22) must be inserted and the
grass collection box (
moved.
Inserting the mulch kit
1. Lift the rear bumper (14) and
remove the collection bag
( 15), if installed.
2. Insert the mulching kit (22) into
the opening as illustrated.
3. Lower the rear bumper (14)
again. It will keep the mulch kit
(22) in place.
Install lateral ejection chute
1. Lift the lateral impact protection
(9).
2. Mount the lateral ejection chute
(21) on the joint rod of the late-
ral impact protection (9) and fit
the lateral impact protection (9).
This holds the side ejection chu-
te (21) in position.

Adjusting the Cut Height

There are 7 different cutting heights:
60 - 75 mm - large cutting height
40 - 60 mm - medium cutting height
25 - 40 mm - low cutting height
The correct height is around 25 – 45 mm
for a decorative lawn and around
45 –65 mm for a used lawn.
15) re-

Switching On and Off

1. Hold the cutting height adjuster
(13) and move it to the correct
cutting height, as appropriate.
A higher cut height should be
selected for the first cut of the
season.
Observe noise control and local
regulations.
1. Place the mower on a level sur-
face.
2. Lift the cover (6) of the device
housing, and insert the charged
battery (7) into the device along
the guide rail. You should be
able to hear the rechargeable
battery lock into place.
3. Insert the ignition key (23) in the
corresponding opening next to
the battery (7).
4. Before switching on, ensure that
the equipment is not in contact
with any objects.
5. To switch the lawnmower on,
press the power switch (17) and
hold it down while pressing one or
more of the safety switches (19)
against the bow-type handle (1).
Release the power switch (17).
GB
35