Lateral Grass Ejection; Operation; Level Gauge; Switching On And Off - Grizzly ERM 1642 Q-360 Translation Of The Original Instructions For Use

GB
2. Lift the impact protection (6).
3. Insert the mulch kit (18). The
red locking button clicks into
place.
Remove mulch kit
4. Lift the impact protection (6).
5. Insert the red locking button
downwards and remove the
mulch kit (18).

Lateral grass ejection

Before using the lateral grass ejec-
tion, the mulch kit (
inserted and the grass collection
box ( 10) has to be removed.
Install lateral ejection canal
1. Unlock the lateral impact protec-
tion (19) by pulling the locking
element (19a) to the left and
opening the lateral impact pro-
tection (19).
2. Mount the lateral ejection chan-
nel (20) and remove the lateral
impact protection (19). It holds
the side ejection channel (20) in
position.

Operation

Level gauge

The level gauge (12) is located on the
side of the grass catcher (10).
Flap (12) open:
grass catcher (10) empty
Flap (12) closed:
grass catcher (10) full
The level indicator (12) works
when the device is in operation.
30

Switching On and Off

18) has to be

Adjusting the Cutting Height

The equipment has 6 positions for setting
the cutting heigh (25-75 mm):
The red LED (
lease button will illuminate as soon
as the lawn mower is connected to
a power supply.
2. To relieve the strain, form a loop
with the end of the power cable
( 14) and hang this into the
strain relief (15).
3. Connect the equipment to the
power supply.
4. Before switching on, ensure that
the equipment is not in contact
with any objects.
5. To switch on, press the release
button (16) on the handle at the
same time as pressing the start
lever. Release the release button
(16).
6. To switch off, release the start
lever (2).
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do not
touch the moving blade. There
is a risk of injury.
Switch off the equipment, discon-
nect the plug and wait for the blade
to stop. There is a risk of injury.
1. Pull the lever (9) outwards and
push it to the desired position .
2. Push the lever back in.
17) above the re-