Mulch Kit; Lateral Grass Ejection; Filling With Engine Oil And Checking The Oil Level - Grizzly BRM 51-163 BSA InStart Translation Of The Original Instructions For Use

4. Remove the transport caps from
the collector attachment.
Fixing the Grass Collection
Box onto the Equipment:
Prior to using the collection box,
the mulch kit and lateral ejection
canal must be removed. (see
).
1. Lift up shock protection (18).
2. Hook the grass collection box
(23) into the mounting provided
for this (34) on the rear of the
equipment. .
3. Release the impact protection
(18). It holds the grass collec-
tion box in position.
Dismantling/Empty out the
Grass Collection Box:
4. Lift the impact protection (18)
and remove the grass collection
box (23).
5. Empty catchment basket (see
chapter „Disposal / Environmen-
tal Protection") and re-install it.
Level gauge
The level gauge (25) is located on the
side of the grass catcher (23). The aero-
dynamic air guidance provided by the flap
also optimises the filling.
Flap open:
grass catcher empty
Flap closed:
grass catcher full

Mulch kit

Prior to using the mulch kit, the
lateral ejection canal has to be
removed. (see
Attaching mulch kit
1. Remove the collection box
, (
2. Lift the impact protection (18).
3. Insert the mulch kit (29). The
red locking button clicks into
place.
Remove mulch kit
4. Lift the impact protection (18).
5. Insert the red locking button
downwards and remove the
mulch kit (29).

Lateral grass ejection

Before using the lateral grass
ejection, the mulch kit (
has to be inserted and the grass
collection box (
removed.
Install lateral ejection canal
1. Lift the lateral impact protection
(16).
2. Mount the lateral ejection chan-
nel (30) and remove the lateral
impact protection (16). It holds
the side ejection channel (30) in
position.
Filling with Engine Oil and
Checking the Oil Level
Place the equipment on a level
base.
)
23), if used.
23) has to be
GB
29)
105