Level Gauge; Mulch Kit; Lateral Grass Ejection; Installing The Starter Cord - Grizzly BRM 51-170 A-OHV Q-360 E-Start Translation Of The Original Instructions For Use

Fixing the Grass Collection
Box onto the Equipment:
2. Lift up shock protection (6).
3. Hook the grass collection
box (19) into the mounting pro-
vided for this (27) on the rear of
the equipment.
4. Release the impact protec-
tion (6). It holds the grass col-
lection box in position.
Dismantling/Empty out the
Grass Collection Box:
5. Lift the impact protection (6)
and remove the grass collection
box (19)
6. Empty catchment basket (see
chapter „Disposal / Environmen-
tal Protection") and re-install it.

Level gauge

The level gauge (
the side of the grass catcher (
aerodynamic air guidance provided by the
flap also optimises the filling.
Flap open: grass catcher
empty
Flap closed: grass catcher full

Mulch kit

Prior to using the mulch kit, the
lateral ejection canal has to be re-
moved (see
Attaching mulch kit
1. Remove the collection box
( 19), if used.
2. Lift the impact protection (6).
3. Push in the mulch kit (23). The
bracket (23a) snaps into place.
19a) is located on
19). The
).
Remove mulch kit
4. Lift the impact protection (6).
5. Push in the bracket (23a) and
remove the mulch kit (23).

Lateral grass ejection

Before using the lateral grass
ejection, the mulch kit (
has to be inserted and the grass
collection box (
removed.
Install lateral ejection canal
1. Unlock the lateral impact protec-
tion (15) by pulling the locking
element (15a) to the left and
opening the lateral impact pro-
tection (15).
2. Mount the lateral ejection chan-
nel (24) and remove the lateral
impact protection (15). It holds
the side ejection channel (24) in
position.

Installing the Starter Cord

1. Pull the safety catch (3) towards the
handle bar (1) and hold it.
2. Slowly pull the starter cord on the
starter handle (22) towards the bar
and hook the starter cord into the
starter cord guide (21).
3. Release the safety catch (3).
Filling with Engine Oil and
Checking the Oil Level
Place the equipment on a level
base.
1. Unscrew the oil filler cap and dipstick
( 7) and pour oil into the tank. The
oil tank holds 0.50 l oil. Use brand oil
(e.g. SAE 30).
GB
23)
19) has to be
107