Change The Viewing Angle Of Your Phone; Connect To The Network - Cisco 8841 User Manual

Change the Viewing Angle of Your Phone

Procedure
Step 1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
Step 2 Rotate the tab 180 degrees.
Step 3
Hold the tab between two fingers, with the corner notches facing you.
Step 4 Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.
Step 5 Return the handset to the handset rest.
Change the Viewing Angle of Your Phone
You can change the angle of the phone to eliminate glare on the screen.
Procedure
Step 1
Hold the receiver in the cradle with one hand.
Step 2 Move the footstand with the other hand to change the angle.

Connect to the Network

You need to connect the phone to the network.
Mobile and Remote Access Through Expressway—If your administrator sets up Mobile and Remote Access
Through Expressway and you connect your phone to the network, it connects to the Expressway server
automatically.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
6
Your Phone