Set Password; Set Up The Profile Account - Cisco 7800 Series User Manual

Set Password

Set Password

Reset your phone password regularly to maintain network security. Keep all passwords in a safe place to avoid
theft.
Before you begin
You must have your existing password.
Procedure
Step 1 Press Applications
Step 2
Select Device administration > Set password.
Step 3 Enter your current password in the Old password field.
Step 4
Enter your new password in the New password and the Reenter new password fields.
Step 5 Select Save.

Set up the Profile Account

You need to enter the authentication credentials to resynchronize your phone with the provisioning profile
when prompted with the Profile account setup screen.
If you missed the Profile account setup screen, you can also access it from the phone menu or the Setup
softkey if available.
If the phone fails to sign in, contact your administrator.
Before you begin
Your administrator specifies the profile authentication type on your phone and provides you with the
authentication credentials.
Procedure
Step 1
Press Applications
Step 2 Select Device administration > Profile account setup.
Your username and password are automatically filled. These fields are blank if your username and password
were not added before.
Step 3
Press Sign in to save your username and password.
Note
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
90
.
.
If any of the Username field or the Password field is empty, the phone displays a grey Sign in
softkey and you can't press the softkey.
Settings