Turn On Do Not Disturb; Turn On Or Turn Off Dnd Using A Star Code - Cisco 7800 Series User Manual

Calls
• Press the Ignore softkey. When you press this softkey, the softkey disappears from the phone screen,
• Press the Volume
The ringer volume is restored during the next incoming call.

Turn On Do Not Disturb

Use Do Not Disturb (DND) to silence your phone and ignore incoming call notifications when you need to
avoid distractions. However, you will always receive paging and emergency calls, even when DND is turned
on.
When you enable DND, your incoming calls forward to another number, such as your voicemail, if it is set
up.
When DND is turned on, Do not disturb is displayed in the top bar of the phone screen.
When you enable DND, by default, it affects all lines on your phone. You can also enable DND on a specific
line from the Preferences menu.
When a line key has both feature key sync and DND enabled, the DND icon
key label.
Procedure
Step 1 Press DND to turn on DND.
If the DND softkey is grayed on the phone screen, contact your administrator.
Step 2
Press Clr DND to turn off DND.
Related Topics

Turn On or Turn Off DND Using a Star Code

You can turn on or turn off the do not disturb feature by dialing the respective star codes that are configured
for your phone. The administrator enters the star codes in the DND Act Code and DND Deact Code fields
respectively on the phone web page.
Procedure
Step 1
To turn on DND, dial the star code provided by your administrator.
and is restored again during the next incoming call.
button down. If you press this button again, the ringer volume decreases.
Phone Web Page, on page 18
Turn on Do Not Disturb for a Specific Line, on page 82
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
Turn On Do Not Disturb
is displayed next to the line
39