Yamaha YFM660RS Assembly Manual page 45

NOTE:
®
Apply a locking agent (LOCTITE ) to the ring nut threads.
1. Tighten the inside ring nut to 55 Nm (5.5 m · kg, 40 ft · lb).
2. Tighten the outside ring nut to 190 Nm (19 m · kg, 140 ft · lb) while holding the inside ring nut.
3. Loosen the inside ring nut to 240 Nm (24 m · kg, 170 ft · lb) while holding the outside ring nut.
4. Tighten one rear axle ring nut set bolt to 6 Nm (0.6 m · kg, 4.3 ft · lb).
5. Tighten the other rear axle ring nut set bolt to 6 Nm (0.6 m · kg, 4.3 ft · lb), and then check that the
first set bolt is tightened to specification.
–41–