Product Safety; Important Headset Safety Information; Compliance Statements; Compliance Statements For The Usa - Cisco 730 User Manual

Product Safety

•
•

Important Headset Safety Information

When you plug in your headset, lower the volume of the headset speaker before you put the headset on. If
you remember to lower the volume before you take the headset off, the volume will start lower when you
plug in your headset again.
Don't allow moisture to get inside your ear cups, the USB-C port, or the 3.5 mm jack.
Be aware of your surroundings. When you use your headset, it may block out important external sounds,
particularly in emergencies or in noisy environments. Don't use the headset while driving. Don't leave your
headset or headset cables in an area where people or pets can trip over them. Always supervise children who
are near your headset or headset cables.

Compliance Statements

Compliance Statements for the USA

General RF Exposure Compliance

This device has been evaluated and found compliant to the ICNIRP (International Committee on Non-Ionizing
Radiation Protection) limits for Human Exposure of RF Exposure.

Part 15 Radio Device

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
Important Headset Safety Information, on page 37
Compliance Statements, on page 37
High Sound Pressure—Avoid listening to high volume levels for long periods to prevent
possible hearing damage.
5
C H A P T E R
Cisco Headset 730 User Guide
37