Honeywell 2MLF-AV8A User Manual page 62

4. Operating Procedures and Monitoring
4.3. Special module monitoring
Step
The four buttons available are:
•
•
•
•
The current value of A/D conversion output and maximum/minimum value are
displayed in upper-half of the monitoring window. Parameter settings for each
selected channel are displayed in the lower-half of the monitoring window.
5
Click Start Monitoring to display the current values A/D conversion output of
all channels.
62 Analog Input Module 2MLF-AV8A, AC8A User's Guide
Reset max./min value
Start Monitoring
Test
Close
Honeywell
Action
R200
September 2010