Honeywell 2MLF-AV8A User Manual page 101

Average process setting
1.
2.
3.
B15 B14 B13 B12
- - - -
Average process method setting
1.
2.
R200
September 2010
You can enable/disable average process per channel.
When disabling the average process, all channels are set as sampling process.
The following figure is an example for setting average process for channel 7.
B11 B10 B9
- - -
BIT
0 Disable
1 Enable
In average process method, there are Count average, and Time average.
All channels execute average process by Count if Time/Count average process is
not set.
Analog Input Module 2MLF-AV8A, AC8A User's Guide
5. Configuration and Function of Internal Memory
5.5. PUT/GET function block use area (parameter area)
B8 B7 B6 B5
- CH7 CH6 CH5
Description
Honeywell
B4 B3 B2 B1
CH4 CH3 CH2 CH1
101
B0
CH0